Product Description

How to use a Bore Cleaner?

1. Apply a few drops of bore cleaner to the front of the Snake.

2. Drop the brass weight at the end of the Bore Cleaner’s black pull cord through the breach at the rear of the barrel and then begin to feed the pull cord down the length of the barrel until the brass weight comes out the end.

3. Grasp the weight and pull it slightly until you can grasp the pull cord as well.

4. Wrap the pull cord around your dominant hand and then continue pulling so that the Bore Cleaner braided nylon floss sweeps through the entire barrel and pull out completely from the end.

5. Repeat the cleaning process as needed and then apply lubricant to the end of cord and pull it through the bore one last time to oil and polish.

Product Features

• The bore cleaner scrapes gunk out of the barrel and follows with a smooth cloth to wipe it clean and lubricate in one quick pull-through.
• The nylon bore cleaner absorbs gun cleaning solvent well and there is no exposed metal to damage sensitive rifling or crown.
• You can roll a snake up in your pocket in the field and then run it through a couple of times to remove fouling quickly. It is great application for the military and recreational shooting.
• Make sure the bore cleaning snakes are ready for proper use in next time you need them.
• Check the right cleaning snakes before you buy.